Y-Strainer Steel or Stainless steel FCY

Y-Strainer FCY

Description

As standard they are made of carbon steel coated with epoxy-polyester paint, and have been designed for the protection of the conduction components.

Filtration occurs by physical retention of those particles which are larger than the filter element, which in this type of filter is a perforated stainless steel sheet. The cleaning of the filter element is manual.

They have excellent performance due to their large filtering area and low pressure drop.

Available filtration degrees:

1 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 Millimeter

Nominal sizes:

DN 50 (2") , DN 80 (3"), DN 100 (4"), DN 125 (5"), DN 150 (6"), DN 200 (8"), DN 250 (10"), DN 300 (12"), DN 350 (14"), DN 400 (16"), DN 500 (20")

Material:

Carbon steel S-235-JR Epoxi-Polyester or stainless steel

Which filter is right for your application?

Approximate calculation of the filter type with an operating pressure of min. 2 bar

Cooling water quality (dirt load of approx. 100mg/l)

	Cooling water quality (dirt load of approx. 100mg/l)
	25 m³/h	50 m³/h	100 m³/h	150 m³/h	200 m³/h
3000µm	FCY-2, DN50	FCY-4, DN100	FCY-5, DN125	FCY-6, DN150	FCY-8, DN200
4000µm	FCY-2, DN50	FCY-4, DN100	FCY-5, DN125	FCY-6, DN150	FCY-8, DN200
6000µm	FCY-2, DN50	FCY-4, DN100	FCY-5, DN125	FCY-6, DN150	FCY-8, DN200
8000µm	FCY-2, DN50	FCY-4, DN100	FCY-5, DN125	FCY-6, DN150	FCY-8, DN200

River water quality (dirt load of approx. 200mg/l)

	River water quality (dirt load of approx. 200mg/l)
	25 m³/h	50 m³/h	100 m³/h	150 m³/h	200 m³/h
3000µm	FCY-2, DN50	FCY-4, DN100	FCY-5, DN125	FCY-6, DN150	FCY-8, DN200
4000µm	FCY-2, DN50	FCY-4, DN100	FCY-5, DN125	FCY-6, DN150	FCY-8, DN200
6000µm	FCY-2, DN50	FCY-4, DN100	FCY-5, DN125	FCY-6, DN150	FCY-8, DN200
8000µm	FCY-2, DN50	FCY-4, DN100	FCY-5, DN125	FCY-6, DN150	FCY-8, DN200

PDF-Dokumente Y-Strainer Typ FCY

	DEU-Datenblatt-Y-Strainer Typ FCY	999.13 KB
	ENG-Data sheet-Strainer FCY	1006.76 KB