Y-Strainer Steel or Stainless steel FY
Y-Strainer FY
Filtration is produced by the retention of particles on suspension. The size of these particles shall be superior to the holes of screen.
Filtration cartridge is composed of a perforated stainless steel screen (AISI-304), usually with 2 mm holes for sprinkler irrigation and 125 micron (AISI-304) with PVC support for drip irrigation. Under request, can be manufactured with other different filtration degrees.
At inlet and outlet exists plugs for manometer ¼”.
Available filtration degrees:
100 µm, 125 µm, 200 µm, 500 µm, 1000 µm (1 mm), 2000 micron (2 mm)
Nominal sizes:
DN 50 (2") , DN 80 (3"), DN 100 (4"), DN 125 (5"), DN 150 (6"), DN 200 (8"), DN 250 (10"), DN 300 (12")
Material:
Carbon steel S-235-JR, Epoxi-Polyester or stainless steel
Which filter is right for your application?
Approximate calculation of the filter type with an operating pressure of min. 2 bar
|
Cooling water quality (dirt load of approx. 100mg/l) |
|||||
|
25 m³/h |
50 m³/h |
100 m³/h |
150 m³/h |
200 m³/h |
|
|
100µm |
FY-3, DN80 | FY-4-165, DN100 | FY-4-220, DN100 | FY-6, DN150 | FY-8, DN200 |
|
200µm |
FY-3, DN80 | FY-4-165, DN100 | FY-4-220, DN100 | FY-6, DN150 | FY-8, DN200 |
|
500µm |
FY-3, DN80 | FY-4-165, DN100 | FY-4-220, DN100 | FY-6, DN150 | FY-8, DN200 |
|
1000µm |
FY-3, DN80 | FY-4-165, DN100 | FY-4-220, DN100 | FY-6, DN150 | FY-8, DN200 |
|
2000µm |
FY-3, DN80 | FY-4-165, DN100 | FY-4-220, DN100 | FY-6, DN150 | FY-8, DN200 |
|
River water quality (dirt load of approx. 200mg/l) |
|||||
|
25 m³/h |
50 m³/h |
100 m³/h |
150 m³/h |
200 m³/h |
|
|
100µm |
FY-3, DN80 | FY-4-165, DN100 | FY-4-220, DN100 | FY-6, DN150 | FY-8, DN200 |
|
200µm |
FY-3, DN80 | FY-4-165, DN100 | FY-4-220, DN100 | FY-6, DN150 | FY-8, DN200 |
|
500µm |
FY-3, DN80 | FY-4-165, DN100 | FY-4-220, DN100 | FY-6, DN150 | FY-8, DN200 |
|
1000µm |
FY-3, DN80 | FY-4-165, DN100 | FY-4-220, DN100 | FY-6, DN150 | FY-8, DN200 |
|
2000µm |
FY-3, DN80 | FY-4-165, DN100 | FY-4-220, DN100 | FY-6, DN150 | FY-8, DN200 |
PDF-Dokumente Y-Strainer Typ FY
| DEU-Datenblatt-Y-Strainer Typ FY | 854.32 KB | |
| ENG-Data sheet-Strainer FY | 859.71 KB |